HAAS SL-40L
CNC turning center
Six CNC machines, a 60-inch milling envelope, and the flexibility to run a single prototype or a full production order.
Four things that define the work we take on.
Four turning centers and two vertical machining centers.
Milling with up to 60 × 30 × 30 inches of XYZ travel.
Large and long turning and boring, plus twin-turret production turning.
From a single prototype to repeat production runs.
Turning, milling, and the engineering work around them, from a first prototype to replacement parts for equipment that's no longer supported.
Small through large-diameter turning, long-part turning and boring, and twin-turret production turning.
023-axis milling, including large-envelope work up to 60 × 30 × 30 inches of XYZ travel.
03One-off jobs through production runs, including custom fixtures and tooling.
04Prototype, short-run, and repeat production machining.
05Replacement components for hard-to-find or obsolete machinery, redesigned where required.
063D design and modeling, product development, 3D printing, and machining.
Six CNC machines covering turning and vertical milling. Full specifications and best-fit applications are listed on the equipment page.
CNC turning center
Twin-turret CNC lathe
CNC turning center
CNC turning center
Enclosed CNC vertical machining center
Vertical machining center
Machine capacities are listed for reference. Final fit depends on part geometry, material, and workholding.
See full equipment specificationsMachining experience across aerospace, defense, and industrial manufacturing.
Precision fittings for naval nuclear applications.
Components for safety valves used in oil and gas service.
Airframe parts and rework for aerospace applications.
Machined implant components for veterinary use.
Parts for industrial ventilation systems.
From aluminum and engineering plastics to titanium and nickel-base superalloys like Inconel and Hastelloy.
Specific grades are listed on the materials page. Material availability is confirmed for each job.
View materials and gradesSunshine State Manufacturing is a precision machine shop in Jacksonville, Florida, led by owner and president Antonio Craciun. Quote requests go directly to the shop.
We machine precision components for engineers, buyers, and manufacturers who need parts made right. Our turning and milling capacity is built around long shafts, large envelopes, and demanding alloys, with the flexibility to handle a single replacement part or an ongoing production order.
We also reverse engineer obsolete and hard-to-find components, and support product development from 3D design through finished machined parts.
Six CNC machines in Jacksonville, Florida: four turning centers for small through large-diameter and long-part work, and two vertical machining centers with up to 60 × 30 × 30 inches of travel. From a single prototype to repeat production.
Four CNC turning centers cover small through large-diameter work, long-part turning and boring, and twin-turret production turning on the Okuma LU-15.
3-axis CNC milling on two vertical machining centers, including large-envelope work with up to 60 × 30 × 30 inches of XYZ travel.
One-off jobs through production runs across all six CNC machines, including the custom fixtures and tooling a job requires.
Prototype, short-run, and repeat production machining, so a part can move from first article to ongoing orders with the same shop.
Replacement components manufactured for hard-to-find or obsolete machinery, with parts redesigned where required.
3D design and modeling, product development, 3D printing, and machining, taking a product from model to finished part.
Four things that define the work we take on.
Turning and milling capacity.
60-inch X-axis milling capability.
Large and long turning and boring.
Prototype through production.
Machine capacities are listed for reference. Final fit depends on part geometry, material, and workholding.
View equipmentFrom aluminum and engineering plastics to titanium and nickel-base superalloys. Material availability is confirmed for each job.
Specific grades are listed on the materials page.
View materials and gradesOur machining experience includes precision naval nuclear fittings, oil and gas safety valves, aerospace airframe parts and rework, veterinary implants, and industrial ventilation systems.
See our experienceFour CNC turning centers and two vertical machining centers in our Jacksonville shop, covering small through large-diameter turning, long-part work, and large-envelope milling.
Small through large-diameter turning, long-part turning and boring, and twin-turret production turning. CNC turning capabilities
CNC turning center
Twin-turret CNC lathe
Our twin-turret machine for production turning.
CNC turning center
CNC turning center
3-axis CNC milling, including large-envelope work. CNC milling capabilities
Enclosed CNC vertical machining center
Vertical machining center
All six machines at a glance.
| Machine | Type | Process | Configuration |
|---|---|---|---|
| HAAS SL-40L | CNC turning center | Turning | — |
| Okuma LU-15 | Twin-turret CNC lathe | Turning | Twin-turret |
| Mori Seiki SL-25 | CNC turning center | Turning | — |
| YCM TC-15 | CNC turning center | Turning | — |
| Supermax Rebel 1 | Enclosed CNC vertical machining center | 3-axis milling | Enclosed |
| Fadal 907-1 6030HT | Vertical machining center | 3-axis milling | — |
Machine capacity note. Machine capacities are listed for reference. Final fit depends on part geometry, material, and workholding.
Include the material, quantity, and required delivery date with your drawing or model, and we'll review it against our equipment.
Request a quoteFrom aluminum and engineering plastics to titanium and nickel-base superalloys like Inconel and Hastelloy. Eleven material categories across turning and milling.
11 categories
Lightweight alloys with good machinability and a high strength-to-weight ratio.
High strength-to-weight and strong corrosion resistance. Widely specified in aerospace and implant applications.
Alloys that hold their strength at high temperatures and resist oxidation and corrosion.
A nickel-chromium superalloy family used in high-temperature and corrosive environments.
Nickel-based alloys specified for corrosion resistance and high-temperature service.
Specialty alloys used where controlled thermal expansion or magnetic properties matter.
Alloys valued for wear resistance and strength at high temperatures.
Corrosion-resistant steels. Precipitation-hardening grades are heat treated to reach high strength.
Alloy steels for parts that carry high loads.
Copper for conductivity, brass for machinability, and bronze for wear and bearing surfaces.
Lightweight materials with chemical resistance and electrical insulation properties.
Send us the grade and specification with your drawing and we'll confirm whether we can machine it.
Request a quoteMaterial availability is confirmed for each job. Include the material grade and any specification on your drawing or in your request, and we'll review it as part of your quote.
See our capabilitiesFrom naval fittings to veterinary implants, our experience covers applications where precision matters.
Precision fittings machined for naval nuclear applications, where parts must meet exacting requirements.
Components for safety valves used in oil and gas service, where reliability is critical.
Airframe parts for aerospace applications, plus rework of existing components.
Machined implant components for veterinary use.
Machined parts for industrial ventilation systems.
Include the material, quantity, and required delivery date, and we'll review it against our equipment and experience.
Sunshine State Manufacturing was founded in July 2020 by Antonio Craciun, who has been programming and running CNC machines since 2011.
Antonio has worked in CNC machining since 2011. Before founding Sunshine State Manufacturing, he programmed CNC lathes producing high-pressure and nuclear fittings for U.S. Navy vessels, and worked as a machinist in oil and gas, where he reverse engineered production fixtures.
He programs Okuma, Mazak, Mori Seiki, and 5-axis machines, customizes the post-processors that generate machine code for each one, and is certified in CMM inspection and metrology.
The work that led to Sunshine State Manufacturing.
Programmed CNC lathes producing high-pressure and nuclear fittings for U.S. Navy vessels.
Machined parts and reverse engineered production fixtures.
Opened a precision CNC machine shop in Jacksonville, Florida.
Skills and credentials Antonio brings to every job.
A shop led by someone who has spent his career at the machine.
Founded and run by a CNC programmer and machinist.
Quote requests go straight to Antonio.
Long parts, large envelopes, demanding alloys, and replacement parts.
Send a drawing, call, or email to talk through your part.
Tell us about your project and Antonio will follow up with you directly.
Thank you for contacting Sunshine State Manufacturing. Your request has been received. Our team will review the information and contact you regarding the next steps.
Because this is a confidential or controlled project, our team will arrange an appropriate secure transfer method with you before receiving any technical drawings.
A look at real projects from our shop, from the original part and 3D model to the finished part running on the machine.
A replacement for a worn turret tool holder. We reverse engineered the original, built a 3D model, printed a test model to check the fit, then machined the new holder, which is now running on the machine.
Machined brass bodies for CndR, a flame-less lighter funded on Kickstarter by Innovation Forest. 283 backers pledged $32,258 to bring the project to life.
More projects coming soon.
Request a quoteInclude these with your request and we can review your part:
Accepted file formats: